PTPOWER 95-3L/N

https://www.phoenixcontact.com/in/products/3260112 High-current terminal block - PTPOWER 95-3L/N - 3260112 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) High-current terminal block, Blocked, Connection method: Power-Turn connection, Number of positions: 4, Cross section: 25 mm² - 95 mm², AWG: 4 - 3/0, Width: 100 mm, Color: gray/blue, Mounting type: NS 35/15 The figure shows a version of the article Why buy this product  Quick and easy connection is now also possible for large conductors with the high-current terminal block  The Push-in connection terminal blocks are characterized by the system features of the CLIPLINE complete system and by easy and tool-free wiring of conductors with ferrules or solid conductors  The compact design enables wiring in a confined space  In addition to using the existing test connection, pick-off terminal blocks can be connected, each of which can also accommodate two test cables Key Commercial Data Packing unit 2 STK GTIN GTIN 4046356778763 Weight per Piece (excluding packing) 727.800 g Custom tariff number 85369010 Country of origin Poland Note Made to Order (non-returnable) Technical data General Number of positions 4 Number of levels 1 Number of connections 2 Potentials 4 Nominal cross section 95 mm² Color gray/blue 10/12/2016   Page 1 / 14 https://www.phoenixcontact.com/in/products/3260112 High-current terminal block - PTPOWER 95-3L/N - 3260112 Technical data General Insulating material PA Flammability rating according to UL 94 V0 Rated surge voltage 8 kV Degree of pollution 3 Overvoltage category III Insulating material group I Maximum load current 232 A (with 95 mm conductor cross section) Nominal current IN 232 A Nominal voltage UN 1500 V Open side panel No Relative insulation material temperature index (Elec., UL 746 B) 130 °C Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 125 °C Static insulating material application in cold -60 °C Behavior in fire for rail vehicles (DIN 5510-2) Test passed Flame test method (DIN EN 60695-11-10) V0 Oxygen index (DIN EN ISO 4589-2) >32 % NF F16-101, NF F10-102 Class I 2 NF F16-101, NF F10-102 Class F 2 Surface flammability NFPA 130 (ASTM E 162) passed Specific optical density of smoke NFPA 130 (ASTM E 662) passed Smoke gas toxicity NFPA 130 (SMP 800C) passed Calorimetric heat release NFPA 130 (ASTM E 1354) 27,5 MJ/kg Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 2 Dimensions Width 100 mm Length 105.5 mm Height NS 35/15 108.7 mm Connection data Connection method Power-Turn connection Connection in acc. with standard IEC 60947-7-1 Conductor cross section solid min. 25 mm² Conductor cross section solid max. 95 mm² Conductor cross section AWG min. 4 Conductor cross section AWG max. 3/0 Conductor cross section flexible min. 25 mm² Conductor cross section flexible max. 95 mm² 10/12/2016   Page 2 / 14 https://www.phoenixcontact.com/in/products/3260112 High-current terminal block - PTPOWER 95-3L/N - 3260112 Technical data Connection data Min. AWG conductor cross section, flexible 4 Max. AWG conductor cross section, flexible 4/0 Conductor cross section flexible, with ferrule without plastic sleeve min. 25 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 95 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 25 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 95 mm² Cross section with insertion bridge, solid max. 95 mm² Cross section with insertion bridge, stranded max. 70 mm² Cross section with insertion bridge, solid max. 95 mm² Cross section with insertion bridge, stranded max. 70 mm² Stripping length 40 mm Standards and Regulations Connection in acc. with standard IEC 60947-7-1 Flammability rating according to UL 94 V0 Environmental Product Compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Drawings Circuit diagram Classifications eCl@ss eCl@ss 4.0 27141120 eCl@ss 4.1 27141120 eCl@ss 5.0 27141120 eCl@ss 5.1 27141120 eCl@ss 6.0 27141120 eCl@ss 7.0 27141120 eCl@ss 8.0 27141120 eCl@ss 9.0 27141120 ETIM ETIM 3.0 EC000897 ETIM 4.0 EC000897 ETIM 5.0 EC000897 10/12/2016   Page 3 / 14 https://www.phoenixcontact.com/in/products/3260112 High-current terminal block - PTPOWER 95-3L/N - 3260112 Classifications UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals Approvals UL Recognized / cUL Recognized / EAC / LR / BV / CSA / DNV GL / cULus Recognized Ex Approvals Approval details UL Recognized   http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 60425     mm²/AWG/kcmil 4-4/0 Nominal current IN 230 A Nominal voltage UN 1000 V cUL Recognized   http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 60425   C mm²/AWG/kcmil 4-4/0 Nominal current IN 230 A Nominal voltage UN 1000 V EAC   7500651.22.01.00246 LR  http://www.lr.org/en 15/20030 BV  http://www.veristar.com/portal/veristarinfo/generalinfo/approved/approvedProducts/equipmentAndMaterials 40933/A1 BV 10/12/2016   Page 4 / 14 https://www.phoenixcontact.com/in/products/3260112 High-current terminal block - PTPOWER 95-3L/N - 3260112 Approvals CSA   http://www.csagroup.org/services/testing-and-certification/certified-product-listing/ 13631   B C mm²/AWG/kcmil 4-4/0 4-4/0 Nominal current IN 230 A 230 A Nominal voltage UN 600 V 1000 V DNV GL  https://www.dnvgl.com/ TAE00000Z9 cULus Recognized   http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm Accessories Accessories Connector Ferrule - A 25 -40 - 3241238 Ferrule, Length: 40 mm, Color: silver     Ferrule - A 35 -40 - 3241239 Ferrule, Length: 40 mm, Color: silver     Ferrule - A 50 -40 - 3241240 Ferrule, Length: 40 mm, Color: silver     10/12/2016   Page 5 / 14 https://www.phoenixcontact.com/in/products/3260112 High-current terminal block - PTPOWER 95-3L/N - 3260112 Accessories Ferrule - A 70 -40 - 3241241 Ferrule, Length: 40 mm, Color: silver     Ferrule - A 95 -40 - 3241242 Ferrule, Length: 40 mm, Color: silver     DIN rail DIN rail perforated - NS 35/15 PERF 2000MM - 1201730 DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 15 mm, width 35 mm, length: 2000 mm     DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714 DIN rail, material: Steel, unperforated, height 15 mm, width 35 mm, length: 2 m     DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602 DIN rail 35 mm (NS 35)     10/12/2016   Page 6 / 14 https://www.phoenixcontact.com/in/products/3260112 High-current terminal block - PTPOWER 95-3L/N - 3260112 Accessories DIN rail - NS 35/15 WH UNPERF 2000MM - 1204135 DIN rail 35 mm (NS 35)     DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756 DIN rail, deep drawn, high profile, unperforated, 1.5 mm thick, material: aluminum, height 15 mm, width 35 mm, length 2000 mm     DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599 DIN rail, material: Galvanized, perforated, height 15 mm, width 35 mm, length: 2 m     DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586 DIN rail, material: Galvanized, unperforated, height 15 mm, width 35 mm, length: 2 m     DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895 DIN rail, material: Copper, unperforated, 1.5 mm thick, height 15 mm, width 35 mm, length: 2 m     10/12/2016   Page 7 / 14 https://www.phoenixcontact.com/in/products/3260112 High-current terminal block - PTPOWER 95-3L/N - 3260112 Accessories End cap - NS 35/15 CAP - 1206573 DIN rail end piece, for DIN rail NS 35/15     End block End clamp - E/AL-NS 35 - 1201662 End clamp, for end support of UKH 50 to UKH 240, is pushed onto DIN rail NS 35 and fixed with 2 screws, width: 10 mm, color: aluminum     Insertion bridge Insertion bridge - EB 2-25/PT - 3260157 Insertion bridge, Pitch: 25 mm, Length: 73 mm, Width: 47.8 mm, Number of positions: 2, Color: red     Insertion bridge - EB 3-25/PT - 3260160 Insertion bridge, Pitch: 25 mm, Length: 73 mm, Width: 47.8 mm, Number of positions: 3, Color: red     Insertion bridge - EB 4-25/PT - 3260161 Insertion bridge, Pitch: 25 mm, Length: 74.5 mm, Width: 97.5 mm, Number of positions: 4, Color: red     10/12/2016   Page 8 / 14 https://www.phoenixcontact.com/in/products/3260112 High-current terminal block - PTPOWER 95-3L/N - 3260112 Accessories Insertion bridge - EBK 4-25/PT - 3260162 Short-circuit jumper for grounding and short-circuiting, short-circuit currents of 800 A/15 s, 1300 A/5 s, 2700 A/10 ms, length: 74.5 mm, width: 140.5 mm, number of positions: 3, color: green-yellow     Insulating sleeve Insulating sleeve - MPS-IH WH - 0201663 Insulating sleeve, Color: white     Insulating sleeve - MPS-IH RD - 0201676 Insulating sleeve, Color: red     Insulating sleeve - MPS-IH BU - 0201689 Insulating sleeve, Color: blue     Insulating sleeve - MPS-IH YE - 0201692 Insulating sleeve, Color: yellow     10/12/2016   Page 9 / 14 https://www.phoenixcontact.com/in/products/3260112 High-current terminal block - PTPOWER 95-3L/N - 3260112 Accessories Insulating sleeve - MPS-IH GN - 0201702 Insulating sleeve, Color: green     Insulating sleeve - MPS-IH GY - 0201728 Insulating sleeve, Color: gray     Insulating sleeve - MPS-IH BK - 0201731 Insulating sleeve, Color: black     Labeled terminal marker Zack marker strip - ZB 16 CUS - 0827463 Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, Mounting type: Snap into tall marker groove, for terminal block width: 16.3 mm, Lettering field: 10.5 x 16.25 mm     Marker for terminal blocks - UC-TM 16 CUS - 0824621 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting type: Snap into tall marker groove, for terminal block width: 16 mm, Lettering field: 15.45 x 10.5 mm     10/12/2016   Page 10 / 14 https://www.phoenixcontact.com/in/products/3260112 High-current terminal block - PTPOWER 95-3L/N - 3260112 Accessories Marker for terminal blocks - UCT-TM 16 CUS - 0829637 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting type: Snap into tall marker groove, for terminal block width: 16 mm, Lettering field: 14.8 x 9.6 mm     Zack Marker strip, flat - ZBF 16 CUS - 0827465 Zack Marker strip, flat, can be ordered: Strip, white, labeled according to customer specifications, Mounting type: Snap into flat marker groove, for terminal block width: 16 mm, Lettering field: 5.15 x 16 mm     Marker for terminal blocks - UC-TMF 16 CUS - 0824678 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting type: Snap into flat marker groove, for terminal block width: 16 mm, Lettering field: 15.45 x 5.1 mm     Marker for terminal blocks - UCT-TMF 16 CUS - 0829693 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting type: Snap into flat marker groove, for terminal block width: 16 mm, Lettering field: 15.2 x 4.7 mm     Pick-off terminal block Pick-off terminal block - AGK 10-PTPOWER - 3260145 Pick-off terminal block, Connection method: Push-in connection, Cross section: 0.5 mm² - 16 mm², AWG: 20 - 6, Width: 18.5 mm, Height: 34.7 mm, Color: gray, Mounting type: On base element     10/12/2016   Page 11 / 14 https://www.phoenixcontact.com/in/products/3260112 High-current terminal block - PTPOWER 95-3L/N - 3260112 Accessories Pick-off terminal block - AGK 10-PTPOWER BU - 3260148 Pick-off terminal block, Connection method: Push-in connection, Cross section: 0.5 mm² - 16 mm², AWG: 20 - 6, Width: 18.5 mm, Height: 34.7 mm, Color: blue, Mounting type: On base element     Pick-off terminal block - AGK 10-PTPOWER GN/YE - 3260151 Pick-off terminal block, Connection method: Push-in connection, Cross section: 0.5 mm² - 16 mm², AWG: 20 - 6, Width: 18.5 mm, Height: 34.7 mm, Color: green/yellow, Mounting type: On base element     Pick-off terminal block - AGK 10-PTPOWER BK/YE - 3260154 Pick-off terminal block, Connection method: Push-in connection, Cross section: 0.5 mm² - 16 mm², AWG: 20 - 6, Width: 18.5 mm, Height: 34.7 mm, Color: black/yellow, Mounting type: On base element     Planning and marking software Software - CLIP-PROJECT ADVANCED - 5146040 Multilingual software for convenient configuration of Phoenix Contact products on standard DIN rails.     Software - CLIP-PROJECT PROFESSIONAL - 5146053 Multilingual software for terminal strip configuration. A marking module enables the professional marking of markers and labels for identifying terminal blocks, conductors and cables, and devices.     Screwdriver tools 10/12/2016   Page 12 / 14 https://www.phoenixcontact.com/in/products/3260112 High-current terminal block - PTPOWER 95-3L/N - 3260112 Accessories Screwdriver - SZF 3-1,0X5,5 - 1206612 Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 1.0 x 5.5 x 150 mm, 2component grip, with non-slip grip     Terminal marking Marker for terminal blocks - TMT (EX9,5)R - 0828295 Marker for terminal blocks, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK X, Mounting type: Snap into universal marker groove, Snap into tall marker groove, Lettering field: 9.5 x 50000 mm     Marker for terminal blocks - US-TM 100 - 0829255 Marker for terminal blocks, Card, white, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK CARD, Mounting type: Snap into universal marker groove, Lettering field: 104 x 9.8 mm     Zack marker strip - ZB 16:UNPRINTED - 0827461 Zack marker strip, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into tall marker groove, for terminal block width: 16 mm, Lettering field: 16 x 10.5 mm     Marker for terminal blocks - UC-TM 16 - 0819217 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, Plotter, Mounting type: Snap into tall marker groove, for terminal block width: 16 mm, Lettering field: 15.45 x 10.5 mm     10/12/2016   Page 13 / 14 https://www.phoenixcontact.com/in/products/3260112 High-current terminal block - PTPOWER 95-3L/N - 3260112 Accessories Marker for terminal blocks - UCT-TM 16 - 0829146 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: THERMOMARK CARD, BLUEMARK CLED, BLUEMARK LED, TOPMARK LASER, THERMOMARK PRIME, Mounting type: Snap into tall marker groove, for terminal block width: 16 mm, Lettering field: 14.8 x 9.6 mm     Zack Marker strip, flat - ZBF 16:UNPRINTED - 0827464 Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into flat marker groove, Lettering field: 16.25 x 10.5 mm     Marker for terminal blocks - UC-TMF 16 - 0819262 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, Plotter, Mounting type: Snap into flat marker groove, for terminal block width: 16 mm, Lettering field: 15.45 x 5.1 mm     Marker for terminal blocks - UCT-TMF 16 - 0829218 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: THERMOMARK CARD, BLUEMARK CLED, BLUEMARK LED, TOPMARK LASER, THERMOMARK PRIME, Mounting type: Snap into flat marker groove, for terminal block width: 16 mm, Lettering field: 15.2 x 4.7 mm     Test plug terminal block Test plugs - MPS-MT - 0201744 Test plugs, with solder connection up to 1 mm² conductor cross section, Color: silver     Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 10/12/2016   Page 14 / 14